Monday, September 26, 2011

Windows 8

Windows 8 as you all know is yet to be released in the public but its developer preview version is released and being downloaded by many geeks around the world to test the new ultimate windows.

So you can download the official developer preview versions for Windows 8 from Microsoft's servers, so click on the link according for 32-bit version and your download will start automatically.

http://wdp.dlws.microsoft.com/WDPDL/9B8DFDFF736C5B1DBF956B89D8A9D4FD925DACD2/WindowsDeveloperPreview-32bit-English.iso

Saturday, September 24, 2011

How to configure a VPN connection to your corporate network in Windows XP Professional

This step-by-step article describes how to configure a virtual private network (VPN) connection to your corporate network in Microsoft Windows XP Professional. A VPN connection is a connection that uses both private and public networks to create a network connection.

Both Point-to-Point Tunneling protocol (PPTP) or Layer Two Tunneling Protocol (L2TP) are automatically installed on your Windows XP-based computer. These protocols help provide security when you access resources on a network by connecting to a remote access server through the Internet or other network. This kind of connection is known as a VPN connection.

How to create a new VPN connection

  1. Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
  2. Click Create a new connection, and then click Next.
  3. Click Connect to the network at my workplace, and then click Next.
  4. Click Virtual Private Network connection, and then click Next.
  5. Type a descriptive name for your company, and then click Next.
  6. Click Do not dial the initial connection, and then click Next.
  7. Type the host name or IP address of the computer where you are connecting, and then click Next.
  8. Use one of the following methods:
    • Click Anyone's use if you want to share the connection with all users.
    • Click My use only if you do not want to share the connection.
  9. Click Next, and then click Finish.
Note This method works when you are connected to the Internet only.

How to modify an existing dial-up connection

You may have to modify some of the parameters in your dial-up connection to successfully connect to the Internet. To make these modifications, follow these steps:
  1. To open an existing connection, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.
  2. Click the connection, and then click Change settings of this connection.
    • On the General tab, you can change the server name or IP address.
    • On the Networking tab, you can change the type of secure protocol.
    • On the Advanced tab, you can enable Internet Connection Firewall protection to prevent access to your computer from the Internet.

      To do this, select the Protect my computer and network by limiting and preventing access to this computer from the Internet check box.

      Note When you enable Internet Connection Firewall protection to prevent access to your computer from the Internet, you may also create problems with the connection to your server. After you enable Internet Connection Firewall protection, verify that the connection to your server is still working.

      A firewall is designed to help protect your computer from attack by malicious users or by malicious software such as viruses that use unsolicited incoming network traffic to attack your computer. If the connection to your server is working and you decide to disable your firewall, you must disconnect your computer from all networks including the Internet. 

5 steps: How to set up your home wireless network


5 steps: How to set up your home wireless network

You can use a wireless network (WLAN) to share Internet access, files, printers, game consoles, and other devices among all the computers in your home. After you’ve completed the initial wireless router setup and added your computers and devices to the network, you can use your home network to surf the web or to play online games—whether you're sitting in your living room or relaxing in your backyard.
It's easier than ever to set up a wireless network, especially now that Internet access and routers (like Linksys wireless routers and D-link wireless routers) have become widely available.

What you’ll need to set up your wireless network

  • An operating system that supports wireless networking
    The Windows 7 operating system fully supports wireless networking. For Windows Vista users, we recommend installing Windows Vista Service Pack 2 before setting up your wireless network. For Windows XP users, we recommend installing Windows XP Service Pack 3. Use Windows Update to check whether you need the service pack and to install it. Click the Start button, click All Programs, click Windows Update, and then click Check for updates. Although the service packs for Windows Vista and Windows XP are not required for wireless networking, they can make things much easier and can help protect you against hackers, worms, and other Internet intruders.
  • A broadband (DSL or cable) Internet connection
    To set up a wireless network, you need a broadband or high-speed Internet connection (not a dial-up connection) provided by an Internet service provider (ISP), usually for a monthly fee. Two common broadband technologies are Digital Subscriber Line (DSL) and cable technology. These require a DSL modem or a cable modem (often provided by your ISP). After you have an ISP and a modem, you're ready to connect to the Internet.

    Set up a new connection to the Internet:
  • Windows 7 and Windows Vista
  • Windows XP
  • A wireless router, a DSL modem, or a cable modem with built-in wireless networking support
    The router converts the signals coming across your Internet connection into a wireless broadcast, sort of like a cordless phone base station. Newer DSL and cable modems come with integrated wireless networking capability and are called modem routers. If the modem router you received or purchased from your ISP already has wireless capability built in, you do not need to purchase a separate wireless router. Just follow the instructions provided by your ISP for activating your wireless connection.

    If you do need to purchase a wireless router, be sure that you buy a wireless router and not a wireless access point. The Linksys router is a popular router for wireless networks because it’s simple to set up. There are many routers to choose from, for example:
  • Linksys wireless routersD-Link wireless routersCisco wireless routersASUS wireless routersWhile you're looking for a wireless router or other wireless equipment in stores or on the Internet, you might notice that you can choose equipment that supports four different wireless networking technologies: 802.11a, 802.11b, 802.11g, and 802.11n. We recommend 802.11g (Wireless-G) or 802.11n (Wireless-N) because they offer excellent performance and are compatible with almost everything.

    NOTE: If you do not want to buy a wireless router or if you want to connect computers or devices temporarily for a specific purpose, like sharing devices or games, you can set up a temporary wireless network without a router. This is called an ad hoc network.

    Set up an ad hoc network:
  • Windows 7
  • Windows Vista
  • Windows XP
  • A computer with built-in wireless networking support or a wireless network adapter
    If you have a newer computer, you may already have built-in wireless capabilities. If this is the case, you don’t need a wireless network adapter. Here’s how to check whether your computer has wireless support installed:
  • Windows 7 and Windows Vista

  • Click Start, click Control Panel, and then click Network and Internet. If you see any of these words listed, “Wireless,” “WLAN,” “Wi-Fi,” “802.11a,” “802.11b,” “802.11g,” or “802.11n,” your computer has wireless capability installed.
  • Windows XP

  • Click Start, right-click My Computer, and then click Properties
  • In the System Properties window, click the Hardware tab.
  • Near the top of this window, click the Device Manager button.
  • In the Device Manager window, there is a list of hardware components which are installed on the computer. Press the Plus sign (+) to the left of the icon to open the Network adapters item in the list. The Network adapters section of the window expands to reveal a list of all network adapters installed on the computer.
  • If you see any of these words in the list of installed network adapters, “Wireless,” “WLAN,” “Wi-Fi,” “802.11a,” “802.11b,” “802.11g,” or “802.11n,” your computer has wireless network support installed.

  • If your desktop or laptop computer does not have built-in wireless support, you need to purchase a network adapter to wirelessly connect your computer to your wireless router. If you need an adapter for a desktop computer, buy a USB wireless network adapter. If you have a laptop, buy a PC card-based network adapter. Make sure that you have one adapter for every computer on your network.

    NOTE: To make setup easy, choose a network adapter made by the same vendor that made your wireless router. For example, if you find a good price on a Linksys router, choose a Linksys network adapter to go with it. To make shopping even easier, buy a bundle, such as those available from Linksys, Actiontec, D-Link, Netgear, Microsoft, and Buffalo. If you have a desktop computer, make sure that you have an available USB port where you can plug in the wireless network adapter. If you don't have any open USB ports, buy a USB hub to add additional ports.
  • A copy of your router setup instructions
    Before you begin setting up your wireless network, it’s a good idea to make sure that you have the copy of the setup instructions provided by the router manufacturer or your ISP. If you do not have a copy, visit the manufacturer’s website for get instructions on how to set up your router. All routers vary, and you may need to consult the instructions to set up your wireless network using your specific router.
Shopping list
  • Shop for a wireless router
  • Shop for a computer with built-in wireless networking support
  • Shop for a wireless network adapter
After you have everything you need, follow these five steps to set up your wireless network.

1. Connect to the Internet

Make sure that your Internet connection and your DSL or cable modem are working. Your wireless network depends on this connection.

2. Connect your wireless router

These are the steps for connecting a stand-alone wireless router to your DSL modem or cable modem. If you have a modem router, follow your ISP’s instructions for connecting your network.
Since you'll be temporarily disconnected from the Internet, print these instructions before you go any further.
First, locate your cable modem or DSL modem and unplug it to turn it off.
Next, connect your wireless router to your modem. Your modem should stay connected directly to the Internet. Later, after you've hooked everything up, your computer will wirelessly connect to your router, and the router will send communications through your modem to the Internet.

Next, connect your router to your modem:
Note: The instructions below apply to a Linksys wireless router. The ports on your router may be labeled differently, and the images may look different on your router. Check the documentation that came with your equipment for additional assistance. Or do a Bing search on “[your manufacturer/model] wireless router setup” to find images and instructions.
  • If you currently have your computer connected directly to your modem: Unplug the network cable from the back of your computer, and plug it into the port labeled Internet, WAN, or WLAN on the back of your router.
  • If you do not currently have a computer connected to the Internet: Plug one end of a network cable (included with your router) into your modem, and plug the other end of the network cable into the Internet, WAN, or WLAN port on your wireless router.
  • If you currently have your computer connected to a router: Unplug the network cable connected to the Internet, WAN, or WLAN port from your current router, and plug this end of the cable into the Internet, WAN, or WLAN port on your wireless router. Then, unplug any other network cables, and plug them into the available ports on your wireless router. You no longer need your original router, because your new wireless router replaces it.

Next, plug in and turn on your cable or DSL modem. Wait a few minutes to give it time to connect to the Internet, and then plug in and turn on your wireless router. After a minute, the Internet, WAN, or WLAN light on your wireless router should light up, indicating that it has successfully connected to your modem.

3. Configure your wireless router


Using the network cable that came with your wireless router, you should temporarily connect your computer to one of the open network ports on your wireless router (any port that isn't labeled Internet, WAN, or WLAN). If you need to, turn your computer on. It should automatically connect to your router.
Next, open Internet Explorer and type in the URL or address to configure your router.
NOTE: Do this on the computer that you are using to set up your wireless network. The computer automatically links you to the router’s page. If you type the router’s URL on a different computer, typing the address in the navigation bar will not take you to your router’s configuration page.
On the router configuration page, you might be prompted for a password. The address and password you use varies depending on what type of router you have, so refer to the instructions included with your router or on the manufacturer’s website.
For quick reference, this table shows the default addresses, user names, and passwords for some common router manufacturers. If the address is not listed here, you can read the documentation that came with your router or go to the manufacturer's webpage to find it. There may be multiple website addresses you can use.
RouterAddressUsernamePassword3Comhttp://192.168.1.1adminadminD-Linkhttp://192.168.0.1adminadminLinksyshttp://192.168.1.1adminadminMicrosoft Broadbandhttp://192.168.2.1adminadminNetgearhttp://192.168.0.1adminpasswordActiontechttp://192.168.0.1usernamepasswordInternet Explorer shows your router's configuration page, along with the modem IP address and other information. Most of the default settings should be fine, but you need to configure three things:
  • Your wireless network name, known as the SSID. This name identifies your network, and it appears in a list of available wireless networks. You should change the default SSID that your ISP provided and give your network a unique name that none of your neighbors are using. This helps you identify your network, and it can help keep your wireless network secure by preventing it from overlapping with other wireless networks that might be using the default SSID.
  • Wi-Fi Protected Access (WPA or WPA2), which can help protect your wireless network. It’s important to help secure your wireless network by setting up a network security key, which turns on encryption. With encryption, people can't connect to your network without the security key, and all information sent across your network is encrypted so that only computers with the key to decrypt the information can read it. This can help prevent attempts to access your network and files without your permission. Wi Fi Protected Access (WPA or WPA2) is the recommended wireless network encryption method. Wireless encryption (WEP) is not as secure. Windows 7, Windows Vista Service Pack 2, and Windows XP Service Pack 3 support WPA2.

    When you set up most routers (stand-alone routers and modem routers), you are asked to provide a pass phrase that the router uses to generate several keys. Make sure that your pass phrase is unique and long (you don't need to memorize it). Some routers and modem routers now come with a function called Quick Security Setup (or QSS) that automatically issues you a key when you press a button on the router.

    Be sure to keep a hard copy and a digital copy of your network security key and pass phrase, in case you lose or misplace them. You can recover a lost network key or reset it on your router, but these are complicated processes that are different for every router and they sometimes entail setting up your network again.
  • Your administrative password, which controls your wireless network. Just like any other password, it should not be a word that you can find in the dictionary, and it should be a combination of letters, numbers, and symbols. Be sure to save a hard copy and a digital copy of this password, too, because you'll need it if you ever have to change your router's settings.
The exact steps you follow to configure these settings will vary depending on the type of router you have. After each configuration setting, be sure to click Save Settings, Apply, or OK to save your changes.
Get more help making your network secure.
Now, before connecting your computers and devices to the network, you should disconnect the wireless network cable from your computer.

4. Connect your computers, printers, and other devices to the wireless network

You can connect multiple computers, printers, and many other peripheral devices, such as an Xbox, Xbox 360, TV, cell phone, iTouch, or iPad, to your network. Before you connect them to your network, make sure that the computer or device you want to add has built-in wireless networking or a network adapter. Many newer devices have built-in wireless capability. If the computer or device you want to add does not have built-in wireless network support, plug the network adapter into your USB port and place the antenna on top of your computer (in the case of a desktop computer) or insert the network adapter into an empty PC card slot (in the case of a laptop). Windows automatically detects the new adapter and may prompt you to insert the CD that came with your adapter. The on-screen instructions guide you through the configuration process.
Use the following links to find step-by-step instructions for adding your specific computer or device to your network using your operating system. There are instructions for each operating system, and they show you how to automatically or manually add wired (Ethernet) or wireless computers and how to add computers running Windows 7, Windows Vista, or Windows XP. There are also instructions for adding printers and both wired and wireless devices.
  • Windows 7
  • Windows Vista
  • Windows XP
  • Use Windows XP to join a network
  • Add a Windows XP-based computer to your network
  • Windows XP: Add an Xbox or Xbox360 to your network

5. Share files, printers, and more

Now that your computers and devices are connected, you can begin sharing files, printers, games, and much more. One of the top reasons for setting up a home network is to share a printer. Another is to share files. The steps for doing this, however, aren’t always obvious, so here are instructions to get you started:


Start Windows Installer in Safe Mode

  Windows Installer will not work under Safe Mode, this means that programs cannot be installed or uninstalled in safe mode without giving a specific command using msiexec in command prompt.

To make Windows Installer work under safe mode, you need to create a registry entry for every type of safe mode you are logged in to.

1.Safe Mode.
Type this in a command prompt:
REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\SafeBoot\Minimal\MSIServer" /VE /T REG_SZ /F /D "Service"

and then

net start msiserver

This will start the Windows Installer Service.

2.Safe Mode with Network

REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\SafeBoot\Network\MSIServer" /VE /T REG_SZ /F /D "Service"

and followed by

net start msiserver

This will start the Windows Installer Service.

Add a program in a startup list of windows

startup list of programs in windows is the list of those programs which would start automatically whenever you start your computer.
There are two methods of adding any program to startup list..

  1. add shortcut to startup folder
  2. edit windows registry
add shortcut to startup folder: 


1- go to the start up folder of windows. don't know where it is..
C:\Documents and Settings\All Users\Start Menu\Programs\Startup
here drive c is in my system change it if your windows is in another drive.
or
go to start --> all programs --> start up (double click on this)


2- create a shortcut of your desired program.
right click--> new --> shortcut


3- now open the properties of new created shortcut
right click on shortcut --> properties


4- here you will find an option Run. change it's value to minimize from normal window


5- you have done it. Restart your windows and check it.




edit windows registry


1- open registry editor
 Start--> run and type as "regedit"


2- Navigate to "HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS\CURRENT VERSION\RUN"


3- Right click on the Run folder


4- Select New ,then select "String value"
then Double click and change the value to your program path.


5- save and exit registry edit


6- Restart the windows.

NetworkMiner is a Network Forensic Analysis Tool (NFAT) for Windows



NetworkMiner v.1.1 Released


NetworkMiner is a Network Forensic Analysis Tool (NFAT) for Windows. NetworkMiner can be used as a passive network sniffer/packet capturing tool in order to detect operating systems, sessions, hostnames, open ports etc. without putting any traffic on the network. NetworkMiner can also parse PCAP files for off-line analysis and to regenerate/reassemble transmitted files and certificates from PCAP files. 


The new version supports features such as:

  •  Extraction of Google Analytics data
  •  Better parsing of SMB data
  •  Support for PPP frames
  •  Even more stable than the 1.0 release 
Download Here:

Friday, April 30, 2010

Interview questions

1) What is Active Directory?
A central component of the Windows platform, Active Directory directory service provides the means to manage the identities and relationships that make up network environments. For example we can create, manage and administor users, computers and printers in the network from active directory.


2) What is DNS? Why it is used? What is "forward lookup" and "reverse lookup" in DNS? What are A records and mx records?
DNS is domain naming service and is used for resolving names to IP address and IP addresses to names. The computer understands only numbers while we can easily remember names. So to make it easier for us what we do is we assign names to computers and websites. When we use these names (Like yahoo.com) the computer uses DNS to convert to IP address (number) and it executes our request.
Forward lookup: Converting names to IP address is called forward lookup.
Reverse lookup: Resolving IP address to names is called reverse lookup.
'A' record: Its called host record and it has the mapping of a name to IP address. This is the record in DNS with the help of which DNS can find out the IP address of a name.
'MX' Record: its called mail exchanger record. Its the record needed to locate the mail servers in the network. This record is also found in DNS.


3) What id DHCP? Why it is used? What are scopes and super scopes?
DHCP: Dynamic host configuration protocol. Its used to allocate IP addresses to large number of PCs in a network environment. This makes the IP management very easy.
Scope: Scope contains IP address like subnet mask, gateway IP, DNS server IP and exclusion range which a client can use to communicate with the other PCs in the network.
Superscope: When we combine two or more scopes together its called super scope.


4) What are the types of LAN cables used? What is a cross cable?
Types of LAN cables that are in use are "Cat 5" and "Cat 6". "Cat 5" can support 100 Mbps of speed and "CAT 6" can support 1Gbps of speed.
Cross cable: Its used to connect same type of devices without using a switch/hub so that they can communicate.


5) What is the difference between a normal LAN cable and cross cable? What could be the maximum length of the LAN cable?
The way the paired wires are connected to the connector (RJ45) is different in cross cable and normal LAN cable.
The theoritical length is 100 meters but after 80 meters you may see drop in speed due to loss of signal.


6) What would you use to connect two computers without using switches? Cross cable. 7) What is IPCONFIG command? Why it is used?
IPCONFIG command is used to display the IP information assigned to a computer. Fromthe output we can find out the IP address, DNS IP address, gateway IP address assigned to that computer.


8) What is APIPA IP address? Or what IP address is assigned to the computer when the DHCP server is not available?
When DHCP server is not available the Windows client computer assignes an automatic IP address to itself so that it can communicate with the network cmputers. This ip address is called APIPA. ITs in the range of 169.254.X.X.
APIPA stands for Automatic private IP addressing. Its in the range of 169.254.X.X.


9) What is a DOMAIN? What is the difference between a domain and a workgroup? Domain is created when we install Active Directory. It's a security boundary which is used to manage computers inside the boundary. Domain can be used to centrally administor computers and we can govern them using common policies called group policies.
We can't do the same with workgroup.


10) Do you know how to configure outlook 2000 and outlook 2003 for a user?
Please visit the link below to find out how to configure outlook 2000 and outlook 2003.http://www.it.cmich.edu/quickguides/qg_outlook2003_server.asp


11) What is a PST file and what is the difference between a PST file and OST file? What file is used by outlook express?
PST file is used to store the mails locally when using outlook 2000 or 2003. OST file is used when we use outlook in cached exchanged mode. Outlook express useds odb file.


12) What is BSOD? What do you do when you get blue screen in a computer? How do you troubleshoot it?
BSOD stands for blue screen of Death. when there is a hardware or OS fault due to which the windows OS can run it give a blue screen with a code. Best way to resolve it is to boot the computer is "LAst known good configuration". If this doesn't work than boot the computer in safe mode. If it boots up than the problemis with one of the devices or drivers.


13) What is RIS? What is Imaging/ghosting?
RIS stands for remote installation services. You save the installed image on a windows server and then we use RIS to install the configured on in the new hardware. We can use it to deploy both server and client OS. Imaging or ghosting also does the same job of capturing an installed image and then install it on a new hardware when there is a need. We go for RIS or iamging/ghosting because installing OS everytime using a CD can be a very time consuming task. So to save that time we can go for RIS/Ghosting/imaging.


14) What is VPN and how to configure it?
VPN stands for Virtual private network. VPN is used to connect to the corporate network to access the resources like mail and files in the LAN. VPN can be configured using the stepsmentioned in the KB: http://support.microsoft.com/kb/305550

15) Your computer slowly drops out of network. A reboot of the computer fixes the problem. What to do to resolve this issue?
Update the network card driver.


16) Your system is infected with Virus? How to recover the data?
Install another system. Insall the OS with the lates pathces, Antivirus with latest updates. Connect the infected HDD as secondary drive in the system. Once done scan and clean the secondary HDD. Once done copy the files to the new system.


17) How to join a system to the domain? What type of user can add a system to the domain?
Please visit the article below and read "Adding the Workstation to the Domain"
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/technologies/directory/activedirectory/stepbystep/domxppro.mspx

18) What is the difference between a switch and a hub?
Switch sends the traffic to the port to which its meant for. Hub sends the traffic to all the ports.


19) What is a router? Why we use it?
Router is a switch which uses routing protocols to process and send the traffic. It also receives the traffic and sends it across but it uses the routing protocols to do so.


20) What are manageable and non manageable switches?
Switches which can be administered are calledmanageable switches. For example we can create VLAN for on such switch. On no manageable swiches we can't do so.
Posted by Chandan Patralekh at 21:12