Friday, February 10, 2012

Installing Windows Server 2008


Installing Windows Server 2008
Installing Windows Server 2008 is pretty straightforward and is very much like installing Windows Vista, but I thought I'd list the necessary steps here for additional information. For those of you who have never installed Vista before, the entire installation process is different than it used to be in previous Microsoft operating systems, and notably much easier to perform.
Using Vista's installation routine is a major benefit, especially for a server OS. Administrators can partition the system's hard drives during setup. More importantly, they can install the necessary AHCI or RAID storage drivers from a CD/DVD or even a USB thumb drive. Thus, error-prone floppies can finally be sent to the garbage bin.
Note: Windows Server 2008 can also be installed as a Server Core installation, which is a cut-down version of Windows without the Windows Explorer GUI. Because you don’t have the Windows Explorer to provide the GUI interface that you are used to, you configure everything through the command line interface or remotely using a Microsoft Management Console (MMC).
The Server Core can be used for dedicated machines with basic roles such as Domain controller/Active Directory Domain Services, DNS Server, DHCP Server, file server, print server, Windows Media Server, IIS 7 web server and Windows Server Virtualization virtual server. To use Windows Server 2008 you need to meet the following hardware requirements:

Component Requirement
Processor • Minimum: 1GHz (x86 processor) or 1.4GHz (x64 processor)
• Recommended: 2GHz or faster Note: An Intel Itanium 2 processor is required for Windows Server 2008 for Itanium-based Systems
Memory • Minimum: 512MB RAM
• Recommended: 2GB RAM or greater
• Maximum (32-bit systems): 4GB (Standard) or 64GB (Enterprise and Datacenter)
• Maximum (64-bit systems): 32GB (Standard) or 2TB (Enterprise, Datacenter and Itanium-based Systems)
Available Disk Space • Minimum: 10GB
• Recommended: 40GB or greater
Note: Computers with more than 16GB of RAM will require more disk space for paging, hibernation, and dump files
Drive DVD-ROM drive
Display and Peripherals • Super VGA (800 x 600) or higher-resolution monitor
• Keyboard
• Microsoft Mouse or compatible pointing device
If you are currently running: You can upgrade to:
Windows Server 2003 Standard Edition (R2, Service Pack 1 or Service Pack 2) Full Installation of Windows Server 2008 Standard Edition
Full Installation of Windows Server 2008 Enterprise Edition
Windows Server 2003 Enterprise Edition (R2, Service Pack 1 or Service Pack 2) Full Installation of Windows Server 2008 Enterprise Edition
Windows Server 2003 Datacenter Edition (R2, Service Pack 1 or Service Pack 2) Full Installation of Windows Server 2008 Datacenter Edition

Follow this procedure to install Windows Server 2008:
Step1. Insert the appropriate Windows Server 2008 installation media into your DVD drive. If you don't have an installation DVD for Windows Server 2008, you can download one for free from Microsoft's Windows 2008 Server Trial website.
Step2. Reboot the computer.


Step3. When prompted for an installation language and other regional options, make your selection and press Next.
 
Step4. Next, press Install Now to begin the installation process.

Step5. Product activation is now also identical with that found in Windows Vista. Enter your Product ID in the next window, and if you want to automatically activate Windows the moment the installation finishes, click Next.
If you do not have the Product ID available right now, you can leave the box empty, and click Next. You will need to provide the Product ID later, after the server installation is over. Press No

Step6. Because you did not provide the correct ID, the installation process cannot determine what kind of Windows Server 2008 license you own, and therefore you will be prompted to select your correct version in the next screen, assuming you are telling the truth and will provide the correct ID to prove your selection later on

 
Step7. If you did provide the right Product ID, select the Full version of the right Windows version you're prompted, and click Next.
Step8. Read and accept the license terms by clicking to select the checkbox and pressing Next.
 
Step9. In the "Which type of installation do you want?" window, click the only available option – Custom (Advanced).


Step10. In the "Where do you want to install Windows?", if you're installing the server on a regular IDE hard disk, click to select the first disk, usually Disk 0, and click Next.

If you're installing on a hard disk that's connected to a SCSI controller, click Load Driver and insert the media provided by the controller's manufacturer.

If you must, you can also click Drive Options and manually create a partition on the destination hard disk.

Step11. The installation now begins, and you can go and have lunch. Copying the setup files from the DVD to the hard drive only takes about one minute. However, extracting and uncompressing the files takes a good deal longer. After 20 minutes, the operating system is installed. The exact time it takes to install server core depends upon your hardware specifications. Faster disks will perform much faster installs… Windows Server 2008 takes up approximately 10 GB of hard drive space.

The installation process will reboot your computer, so, if in step #10 you inserted a floppy disk (either real or virtual), make sure you remove it before going to lunch, as you'll find the server hanged without the ability to boot (you can bypass this by configuring the server to boot from a CD/DVD and then from the hard disk in the booting order on the server's BIOS)

Step12. Then the server reboots you'll be prompted with the new Windows Server 2008 type of login screen. Press CTRL+ALT+DEL to log in.


 
 
Step13. Click on Other User.
 
 
 
Step14. The default Administrator is blank, so just type Administrator and press Enter.
Step15. You will be prompted to change the user's password. You have no choice but to press Ok.
Step16. In the password changing dialog box, leave the default password blank (duh, read step #15…), and enter a new, complex, at-least-7-characters-long new password twice. A password like "topsecret" is not valid (it's not complex), but one like "T0pSecreT!" sure is. Make sure you remember it.


Step17. Someone thought it would be cool to nag you once more, so now you'll be prompted to accept the fact that the password had been changed. Press Ok
 
Step18. Finally, the desktop appears and that's it, you're logged on and can begin working. You will be greeted by an assistant for the initial server configuration, and after performing some initial configuration tasks, you will be able to start working.





 

Tuesday, January 3, 2012

How can I disable the User Account Control (UAC) feature on my Windows Vista computer?

Windows Vista has the built-in ability to automatically reduce the potential of security breaches in the system. It does that by automatically enabling a feature called User Account Control (or UAC for short). The UAC forces users that are part of the local administrators group to run like they were regular users with no administrative privileges.
Read more about UAC here: What's User Account Control in Windows Vista?
Running Windows 7? Also see our article on disabling UAC for Windows 7.
Although UAC clearly improves the security on Windows Vista, under some scenarios you might want to disable it, for example when giving demos in front of an audience (demos that are not security related, for example). Some home users might be tempted to disable UAC because of the additional mouse clicking it brings into their system, however I urge them not to immediately do so, and try to get used to it instead.
Anyway, if required, you can disable UAC by using one of the following methods:

Method #1 - Using MSCONFIG

  1. Launch MSCONFIG by from the Run menu.
  2. Click on the Tools tab. Scroll down till you find "Disable UAC" . Click on that line.
    MSCONFIG - Disable Account Protection
  3. Press the Launch button.
  4. A CMD window will open. When the command is done, you can close the window.
  5. Close MSCONFIG. You need to reboot the computer for changes to apply.
You can re-enable UAC by selecting the "Enable UAC" line and then clicking on the Launch button.
*Recommended: Speed up Vista boot times by reducing the number of programs that load at startup. Control your Vista startup list with this Vista app

Method #2 - Using Regedit

  1. Open Registry Editor.
  2. In Registry Editor, navigate to the following registry key:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System
  3. Locate the following value (DWORD): EnableLUA and give it a value of 0.
    Regedit - Disable UAC
  4. Note: As always, before making changes to your registry you should always make sure you have a valid backup. In cases where you're supposed to delete or modify keys or values from the registry it is possible to first export that key or value(s) to a .REG file before performing the changes.
  5. Close Registry Editor. You need to reboot the computer for changes to apply.
In order to re-enable UAC just change the above value to 1.

Method #3 - Using Group Policy

This can be done via Local Group Policy or via Active Directory-based GPO, which is much more suited for large networks where one would like to disable UAC for many computers at once.
If using Local Group Policy you'll need to open the Group Policy Editor (Start > Run > gpedit.msc) from your Vista computer.
If using in AD-based GPO, open Group Policy Management Console (Start > Run > gpmc.msc) from a Vista computer that is a member of the domain. In the GPMC window, browse to the required GPO that is linked to the OU or domain where the Vista computers are located, then edit it.
  1. In the Group Policy Editor window, browse to Computer Configuration > Windows Settings > Security Settings > Local Policies > Security Options.
    Group Policy - Disable UAC
  2. In the right pane scroll to find the User Access Control policies (they're down at the bottom of the window). You need to configure the following policies:Group Policy - Disable UAC
  3. You'll need to reboot your computers.

Method #4 - Using Control Panel

  1. Open Control Panel.
  2. Under User Account and Family settings click on the "Add or remove user account".
    Add or remove user account
  3. Click on one of the user accounts, for example you can use the Guest account.
  4. Under the user account click on the "Go to the main User Account page" link.
    Go to the Main User Accounts Page
  5. Under "Make changes to your user account" click on the "Change security settings" link.
    Change security settings
  6. In the "Turn on User Account Control (UAC) to make your computer more secure" click to unselect the "Use User Account Control (UAC) to help protect your computer". Click on the Ok button.
    Turn on AUC
  7. You will be prompted to reboot your computer. Do so when ready.
    Disable UAC - Reboot
In order to re-enable UAC just select the above checkbox and reboot.
Related Vista Note: Some users have asked if we can help with a missing DirectX dll files in Windows Vista required to play some games.  You can download the d3drm.dll file here

Unable to Logon to Windows 2003 Domain Due to Windows Cannot Connect to the Domain Error

some IT admins report issues with Windows XP workstations that are joined to a Windows 2003 Active Directory domain. These workstations are part of the domain, however, when a domain user tries to authenticate and logon to the domain from one of these workstations they cannot login and receive the following error message:
Windows cannot connect to the domain either because the domain controller is down or otherwise unavailable, or because your computer account was not found. Please try again later. If this message continues to appear contact your System Administrator for assistance.
This error is received even though the computer account for the workstation and user account for the user both exist.
This or error may appear when a PC is replaced with another computer with the same computer name without first deleting the duplicate computer name from the Active Directory domain before joining the new workstation to the domain with the same duplicate name.
The funny part is that the symptom may either appear immediately at the first try, or even after a few successful logons.
The cause of the error is usually related to security identifier (SID) issues. Another possible cause for the error is that the computer account for the workstation was accidentally deleted from the Active Directory domain.
Another common cause for the error is using Norton Ghost or any other similar disk cloning software. This happens when the administrator has cloned one XP machine and reproduced it to many other new computers without first using and running Microsoft's SYSPREP utility (read more on that in a different article).
In most cases, the error does not have anything to do with the user account part, only with the computer account.
The resolution to the above error is:
1.    Login to the Windows Server 2003 Domain Controller, open DSA.MSC (Active Directory Users and Computers) and delete the computer account object from the domain.
2.    Login to the Windows XP workstation as a local administrator. If you cannot logon as local administrator, try to disconnect the network cable and login to the computer by using a domain administrator user that was used to logon on the PC before. This will be made possible because of the cached logon credentials feature that remembers the last 10 successful logons.
3.    Go to Control Panel, then click on System icon, then go to Computer Name tab. You can also do this by right-clicking My Computer, and then Properties or by pressing the Windows logo key ΓΏ and Break.
4.    Remove the computer from the domain by clicking on “Change”. You should see that Domain button is now selected. Remember your domain name in the text box. Select the “Workgroup” radio button to remove the computer from the domain, and put any workgroup name in the text box (e.g. workgroup).
5.    Click OK to exit and reboot the computer.
6.    After the computer restarts, go back to Control Panel > System > Computer Name tab, and click Change.
7.    Rejoin the domain by chocking the Domain button. Enter the domain name noted in step 4.
8.    You might be prompter to enter the credentials of one of the Domain Admin users. This can be bypassed if one of the Domain Admins manually creates a computer account in Active Directory Users and Computers for the workstation you're about to join.
9.    Click OK to exit.
10. Reboot the PC.
Done.

Sunday, December 25, 2011

Windows XP Boot Sequence How a Computer Starts Its Day

Windows XP Boot Sequence  How a Computer Starts Its Day  
 
Ever wonder what happens from the time you turn your computer on until you see the Windows login screen? Let me tell you about it.
When you hit the power button on your computer a whole lot of stuff happens. We call this the boot process. In the days when I first started using computers there was literally a "boot disk", a floppy (5.25" not a 3.5") disk that told the system where to go and what to do so that the operating system would start up. Since then the boot sequence has become somewhat more complicated. So let me take you thru the steps the computer takes to get started. For my example I'm going to use a Windows XP system.
  1. First is the POST, this stands for Power On Self Test, for the computer. This process tests memory as well as a number of other subsystems. You can usually monitor this as it runs each test. After that is complete the system will run POST for any device that has a BIOS (Basic Input-Output System). An AGP has its own BIOS, as do some network cards and various other devices.
  2. Once the POST is complete and the BIOS is sure that everything is working properly, the BIOS will then attempt to read the MBR (Master Boot Record). This is the first sector of the first hard drive (called the Master or HD0). When the MBR takes over it means that Windows is now in control.
  3. The MBR looks at the BOOT SECTOR (the first sector of the active partition). That is where NTLDR is located, NTLDR is the BOOT LOADER for Windows XP. NTLDR will allow memory addressing, initiate the file system, read the boot.ini and load the boot menu. NTLDR has to be in the root of the active partition as do NTDETECT.COM, BOOT.INI, BOOTSECT.DOS (for multi-OS booting) and NTBOOTDD.SYS (if you have SCSI adapters)
  4. Once XP is selected from the Boot Menu, NTLDR will run NTDETECT.COM, BOOT.INI and BOOTSECT.DOS to get the proper OS selected and loaded. The system starts in 16-bit real mode and then moves into 32-bit protected mode.
  5. NTLDR will then load NTOSKRNL.EXE and HAL.DLL. Effectively, these two files are windows XP. They must be located in %SystemRoot%System32.
  6. NTLDR reads the registry, chooses a hardware profile and authorizes device drivers, in that exact order.
  7. At this point NTOSKRNL.EXE takes over. It starts WINLOGON.EXE that in turn starts LSASS.EXE, this is the program that display the Logon screen so that you can logon.

Monday, October 31, 2011

*** Edit PDF files directly - download pdfpen ***

Edit PDF files directly - download pdfpen





Pdf files are read only files and editing those is not an easy task. You have to covert it in some other form to edit. PDF is Portable Document Format which is a non editable document format.

If you want to edit PDF files and do not want to waste your time in converting this in some editable format and then edit and then convert to PDF, you need to download pdfpen which is a nice tool for pdf editing.

First of all, it lets you easily edit PDF files, which is great, when you have to frequently work with this type of files and you don't want to spend too much time with converting them all the time.

In addition to the fact that it lets you edit PDF files in different ways, PDFpen also provides you a lot of fancy features, such as Evernote integration or AppleScript support. Not to mention the fact that it uses the OCR technology beautifully.

Download Here:

http://mac.softpedia.com/progDownload/PDFpen-Download-981.html

Thursday, October 13, 2011

How to hack with Trojan | Prorat tutorial



How to hack with Trojan | Prorat tutorial


Prorat a famous trojan for hacking system, facebook, gmail, yahoo, twitter and other accounts. Today i wil show you step by step guide to hack with Prorat.


First of download Prorat from the given link
http://www.prorat.net/downloads.php


Then disable your antivirus. It is necessary other wise your downloaded trojan will be detected and deleted. Don't worry, it will not harm your system at this stage.


Now run Prorat.exe
You will see the prorat window. There are so many options but you have to create a server first. 


So click on create server.
There will be 3 options

  1. Create Prorat server
  2. Create Downloader Server
  3. Create Cgi Victim List & usage



now click on create prorat server


A new window will popup. which will have a lots of options in side bar.

  • Notifications
  • General settings
  • Bind with Files
  • Server extnsions
  • Server Icons



You have to use all options one by one to create a server.
Now in Notofication. Mark on Use Mail Notification and enter your email id. there will be a default id. Erase it and enter your. Then Test. It will send a testing mail to your email. Check your spam too.


Then Go to general settings and select all the options which you want to have in your trojan.


Then go to Bind with file and select file to bind your trojan with.
At last select your server extension and icon. Then click on Create server.
Now you have created a server.


Send this server file to the victim you want to hack, but before sending this file to victim make it FUD (Fully UnDetectable) with FUD cryptors. Search for this website for FUD articles. 
after creating server FUD, it is ready to send to the victim.


Send this file to the victim. If the victim will run the server in the system, Trojan server will send you the notification email with the IP address of the victim. Use this ip and run your prorat.


At the top there is an option for IP and port. Enter thr IP and port and click on connect.
wait to connect.
After getting connected to the victim's system.. you can use any of the options available on the prorat to hack the user's system